Iso 898-1 standard pdf

Iso 898-1 standard pdf
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 898-1 January 2013 ICS 21.060.10 Supersedes EN ISO 898-1:2009 English Version Mechanical properties of fasteners made of carbon steel and
This part of ISO 3506 applies to bolts, screws and studs ⎯ with nominal thread diameter d u 39 mm, ⎯ of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and
All rights of this IS 1367( Part 3 ) :2002 ISO 898-1:1999 (dk-np%m) Indian Standard file is reserved to who prepared it. is 1 3 67( part 3 ) :2002 is o 898-1:1999 (dk-np%m ) indian standard technical supply conditions for threaded steel fasteners part 3 mechanical properties of fasteners Last Update: 6 year ago
DIN EN ISO 898-1 – 2013-05 This standard specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel with an ISO metric screw thread in accordance with ISO 68-1 with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3 when tested at an ambient temperature range of 10 °C to
Standard Swedish standard · SS-EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2009)
scope: This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C.
PDF/A-1 is a constrained form of Adobe PDF version 1.4 intended to be suitable for long-term preservation of page-oriented documents for which PDF is already being used in practice. The ISO standard [ISO 19005-1:2005] was developed by a working group …
With over 100 years of experience the British Standards Institute is recognised as the UK’s National standards body. Their committees work with the manufacturing and service industries, government, businesses and consumers to facilitate the production of British, European and International
AS 4291.1—2000 ISO 898-1:1999 Australian Standard™ Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs
For non-standard fasteners, it is advisable to follow as closely as possible the choice already made for similar standard fasteners. Table 3 — Mechanical and physical properties of bolts, screws and studs

standards shall be withdrawn at the latest by June 2007. EN 13445-2:2002/A3:2008 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. EN 13445-2:2002/A5:2008 shall be given the status of a national standard, either by
Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
Standard ISO standard · ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs

Mechanical properties of common ISO property Fastenal

INTERNATIONAL ISO STANDARD 898-1 Industry Standards

ISO standards should generally be adopted as EN standards without any changes. The difference between ISO and The difference between ISO and EN standards is that EN standards following the decision of the European Council have to be adopted and implemen-
Download international iso standard 898 1 for FREE. All formats available for PC, Mac, eBook Readers and other mobile devices. Download international iso standard 898 1.pdf
NOTE 1: References to ‘business’ in this International Standard should be interpreted broadly to mean those activities that are core to the purposes for the organization’s existence. NOTE 2: ISO/IEC 17799 provides implementation guidance that can be used when designing controls.


Standard ISO standard · ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and …
Minimum tensile and proof strengths per ISO 898-1 where applicable. The torque values can only be achieved if nut (or tapped hole) has a proof load greater than or …
Standard Språk: Engelsk Utgave: 1 (2013-04-01) Erstatter: ISO 898-1:2009 excludes certain fasteners that do not fulfil its tensile or torsional requirements because the geometry of their heads reduce the shear area in the head compared to the stress area in the thread. These include fasteners having a low head, with or without external driving feature, a low round or cylindrical head with
part of ISO 4759 and the product standard, the product standard takes precedence. It is recommended that these tolerances also be used for non-standard fasteners. Dimensions and tolerances given in this part of ISO 4759 are in millimetres.
ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/29 on Fasteners. It is identical with, and has been reproduced from ISO 898 …
British standard bs en iso 898-1:1999 mechanical properties of fasteners made of carbon steel and alloysteel- part 1: bolts, screws and studs the european standard…


is 1367( part 3 ) :2002 iso 898-1:1999 (dk-np%m) indian standard technical supply conditions for threaded steel fasteners part 3 mechanical properties of fasteners made of carbon
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
ISO 898-7:1992 Preview Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm This standard was last reviewed and confirmed in 2015.
Publication referred to Corresponding British Standard ISO898-1:1988 BS EN20898 Mechanical properties of fasteners (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1995, and conflicting national standards shall be withdrawn at the latest by July1995. According to the CEN
INTERNATIONAL STANDARD ISO 898-2:2012(E) Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread 1 Scope This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient
This standard was last reviewed and confirmed in 2018. Therefore this version remains current. ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the
Standards conversion DIN £ ISO/EN The conversion of some national DIN standards to ISO or EN standards is (was) done with the aim of deconstructing trade barriers in international goods exchange and harmonising the technical rules in the common single European market.

ISO-898-1 Scribd – Read books audiobooks and more

INTERNATIONAL STANDARD 11898-2 SAI Global

IS 1367-3 (2002) Technical Supply Conditions for Threaded


International Iso Standard 898 1.pdf Free Download

INTERNATIONAL ISO STANDARD 898-1 itc.co.ir


ISO 898-1 standards.globalspec.com

NS-EN ISO 898-12013 Norsk Standard standard.no

IS 1367( Part 3 )2002 ISO 898-11999 (dk-np%m) Indian

INTERNATIONAL ISO STANDARD 8992 EVS

INTERNATIONAL ISO STANDARD 898 2 PDF documents


INTERNATIONAL ISO STANDARD 13918 betawelding.ir

Mechanical properties of common ISO property Fastenal
INTERNATIONAL ISO STANDARD 8992 EVS

Minimum tensile and proof strengths per ISO 898-1 where applicable. The torque values can only be achieved if nut (or tapped hole) has a proof load greater than or …
With over 100 years of experience the British Standards Institute is recognised as the UK’s National standards body. Their committees work with the manufacturing and service industries, government, businesses and consumers to facilitate the production of British, European and International
ISO 898-7:1992 Preview Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm This standard was last reviewed and confirmed in 2015.
AS 4291.1—2000 ISO 898-1:1999 Australian Standard™ Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
Download international iso standard 898 1 for FREE. All formats available for PC, Mac, eBook Readers and other mobile devices. Download international iso standard 898 1.pdf
Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
DIN EN ISO 898-1 – 2013-05 This standard specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel with an ISO metric screw thread in accordance with ISO 68-1 with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3 when tested at an ambient temperature range of 10 °C to
ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/29 on Fasteners. It is identical with, and has been reproduced from ISO 898 …

ISO-898-1 Scribd – Read books audiobooks and more
INTERNATIONAL STANDARD 11898-2 SAI Global

This part of ISO 3506 applies to bolts, screws and studs ⎯ with nominal thread diameter d u 39 mm, ⎯ of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and
ISO 898-7:1992 Preview Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm This standard was last reviewed and confirmed in 2015.
part of ISO 4759 and the product standard, the product standard takes precedence. It is recommended that these tolerances also be used for non-standard fasteners. Dimensions and tolerances given in this part of ISO 4759 are in millimetres.
Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
INTERNATIONAL STANDARD ISO 898-2:2012(E) Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread 1 Scope This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient
Standard ISO standard · ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
standards shall be withdrawn at the latest by June 2007. EN 13445-2:2002/A3:2008 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. EN 13445-2:2002/A5:2008 shall be given the status of a national standard, either by

NS-EN ISO 898-12013 Norsk Standard standard.no
International Iso Standard 898 1.pdf Free Download

ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/29 on Fasteners. It is identical with, and has been reproduced from ISO 898 …
standards shall be withdrawn at the latest by June 2007. EN 13445-2:2002/A3:2008 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. EN 13445-2:2002/A5:2008 shall be given the status of a national standard, either by
This part of ISO 3506 applies to bolts, screws and studs ⎯ with nominal thread diameter d u 39 mm, ⎯ of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and
Minimum tensile and proof strengths per ISO 898-1 where applicable. The torque values can only be achieved if nut (or tapped hole) has a proof load greater than or …
Standard Swedish standard · SS-EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2009)
For non-standard fasteners, it is advisable to follow as closely as possible the choice already made for similar standard fasteners. Table 3 — Mechanical and physical properties of bolts, screws and studs
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
NOTE 1: References to ‘business’ in this International Standard should be interpreted broadly to mean those activities that are core to the purposes for the organization’s existence. NOTE 2: ISO/IEC 17799 provides implementation guidance that can be used when designing controls.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 898-1 January 2013 ICS 21.060.10 Supersedes EN ISO 898-1:2009 English Version Mechanical properties of fasteners made of carbon steel and
Standard ISO standard · ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and …

IS 1367( Part 3 )2002 ISO 898-11999 (dk-np%m) Indian
INTERNATIONAL ISO STANDARD 898-1 Industry Standards

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 898-1 January 2013 ICS 21.060.10 Supersedes EN ISO 898-1:2009 English Version Mechanical properties of fasteners made of carbon steel and
scope: This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C.
Download international iso standard 898 1 for FREE. All formats available for PC, Mac, eBook Readers and other mobile devices. Download international iso standard 898 1.pdf
part of ISO 4759 and the product standard, the product standard takes precedence. It is recommended that these tolerances also be used for non-standard fasteners. Dimensions and tolerances given in this part of ISO 4759 are in millimetres.
Standard ISO standard · ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and …
Standard ISO standard · ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
Standard Språk: Engelsk Utgave: 1 (2013-04-01) Erstatter: ISO 898-1:2009 excludes certain fasteners that do not fulfil its tensile or torsional requirements because the geometry of their heads reduce the shear area in the head compared to the stress area in the thread. These include fasteners having a low head, with or without external driving feature, a low round or cylindrical head with
Publication referred to Corresponding British Standard ISO898-1:1988 BS EN20898 Mechanical properties of fasteners (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1995, and conflicting national standards shall be withdrawn at the latest by July1995. According to the CEN
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
Standard Swedish standard · SS-EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts, screws and studs with specified property classes – Coarse thread and fine pitch thread (ISO 898-1:2009)
AS 4291.1—2000 ISO 898-1:1999 Australian Standard™ Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs
standards shall be withdrawn at the latest by June 2007. EN 13445-2:2002/A3:2008 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2009, and conflicting national standards shall be withdrawn at the latest by June 2009. EN 13445-2:2002/A5:2008 shall be given the status of a national standard, either by

ISO 898-1 standards.globalspec.com
Mechanical properties of common ISO property Fastenal

Standard ISO standard · ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
Standard ISO standard · ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and …
ISO 898-7:1992 Preview Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm This standard was last reviewed and confirmed in 2015.
Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
Standard Språk: Engelsk Utgave: 1 (2013-04-01) Erstatter: ISO 898-1:2009 excludes certain fasteners that do not fulfil its tensile or torsional requirements because the geometry of their heads reduce the shear area in the head compared to the stress area in the thread. These include fasteners having a low head, with or without external driving feature, a low round or cylindrical head with
All rights of this IS 1367( Part 3 ) :2002 ISO 898-1:1999 (dk-np%m) Indian Standard file is reserved to who prepared it. is 1 3 67( part 3 ) :2002 is o 898-1:1999 (dk-np%m ) indian standard technical supply conditions for threaded steel fasteners part 3 mechanical properties of fasteners Last Update: 6 year ago
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 898-1 January 2013 ICS 21.060.10 Supersedes EN ISO 898-1:2009 English Version Mechanical properties of fasteners made of carbon steel and
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
ii PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee ME/29 on Fasteners. It is identical with, and has been reproduced from ISO 898 …
INTERNATIONAL STANDARD ISO 898-2:2012(E) Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread 1 Scope This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient
ISO standards should generally be adopted as EN standards without any changes. The difference between ISO and The difference between ISO and EN standards is that EN standards following the decision of the European Council have to be adopted and implemen-
This part of ISO 3506 applies to bolts, screws and studs ⎯ with nominal thread diameter d u 39 mm, ⎯ of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and
DIN EN ISO 898-1 – 2013-05 This standard specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel with an ISO metric screw thread in accordance with ISO 68-1 with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3 when tested at an ambient temperature range of 10 °C to

ISO 898-1 standards.globalspec.com
Mechanical properties of common ISO property Fastenal

Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
part of ISO 4759 and the product standard, the product standard takes precedence. It is recommended that these tolerances also be used for non-standard fasteners. Dimensions and tolerances given in this part of ISO 4759 are in millimetres.
Standards conversion DIN £ ISO/EN The conversion of some national DIN standards to ISO or EN standards is (was) done with the aim of deconstructing trade barriers in international goods exchange and harmonising the technical rules in the common single European market.
With over 100 years of experience the British Standards Institute is recognised as the UK’s National standards body. Their committees work with the manufacturing and service industries, government, businesses and consumers to facilitate the production of British, European and International
This part of ISO 3506 applies to bolts, screws and studs ⎯ with nominal thread diameter d u 39 mm, ⎯ of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and

IS 1367( Part 3 )2002 ISO 898-11999 (dk-np%m) Indian
Mechanical properties of common ISO property Fastenal

Standard Språk: Engelsk Utgave: 1 (2013-04-01) Erstatter: ISO 898-1:2009 excludes certain fasteners that do not fulfil its tensile or torsional requirements because the geometry of their heads reduce the shear area in the head compared to the stress area in the thread. These include fasteners having a low head, with or without external driving feature, a low round or cylindrical head with
NOTE 1: References to ‘business’ in this International Standard should be interpreted broadly to mean those activities that are core to the purposes for the organization’s existence. NOTE 2: ISO/IEC 17799 provides implementation guidance that can be used when designing controls.
For non-standard fasteners, it is advisable to follow as closely as possible the choice already made for similar standard fasteners. Table 3 — Mechanical and physical properties of bolts, screws and studs
British standard bs en iso 898-1:1999 mechanical properties of fasteners made of carbon steel and alloysteel- part 1: bolts, screws and studs the european standard…
Publication referred to Corresponding British Standard ISO898-1:1988 BS EN20898 Mechanical properties of fasteners (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1995, and conflicting national standards shall be withdrawn at the latest by July1995. According to the CEN
scope: This part of ISO 898 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C.
PDF/A-1 is a constrained form of Adobe PDF version 1.4 intended to be suitable for long-term preservation of page-oriented documents for which PDF is already being used in practice. The ISO standard [ISO 19005-1:2005] was developed by a working group …
ISO 898-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but
Standards conversion DIN £ ISO/EN The conversion of some national DIN standards to ISO or EN standards is (was) done with the aim of deconstructing trade barriers in international goods exchange and harmonising the technical rules in the common single European market.
Regelgewinde und Feingewinde (ISO 898-1:2013) This European Standard was approved by CEN on 14 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
All rights of this IS 1367( Part 3 ) :2002 ISO 898-1:1999 (dk-np%m) Indian Standard file is reserved to who prepared it. is 1 3 67( part 3 ) :2002 is o 898-1:1999 (dk-np%m ) indian standard technical supply conditions for threaded steel fasteners part 3 mechanical properties of fasteners Last Update: 6 year ago
DIN EN ISO 898-1 – 2013-05 This standard specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel with an ISO metric screw thread in accordance with ISO 68-1 with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3 when tested at an ambient temperature range of 10 °C to

INTERNATIONAL ISO STANDARD 898-1 itc.co.ir
ISO 898-1 standards.globalspec.com

Standard ISO standard · ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs
part of ISO 4759 and the product standard, the product standard takes precedence. It is recommended that these tolerances also be used for non-standard fasteners. Dimensions and tolerances given in this part of ISO 4759 are in millimetres.
Standards conversion DIN £ ISO/EN The conversion of some national DIN standards to ISO or EN standards is (was) done with the aim of deconstructing trade barriers in international goods exchange and harmonising the technical rules in the common single European market.
PDF/A-1 is a constrained form of Adobe PDF version 1.4 intended to be suitable for long-term preservation of page-oriented documents for which PDF is already being used in practice. The ISO standard [ISO 19005-1:2005] was developed by a working group …
Publication referred to Corresponding British Standard ISO898-1:1988 BS EN20898 Mechanical properties of fasteners (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1995, and conflicting national standards shall be withdrawn at the latest by July1995. According to the CEN

INTERNATIONAL ISO STANDARD 898 2 PDF documents
INTERNATIONAL ISO STANDARD 898-1 itc.co.ir

British standard bs en iso 898-1:1999 mechanical properties of fasteners made of carbon steel and alloysteel- part 1: bolts, screws and studs the european standard…
Minimum tensile and proof strengths per ISO 898-1 where applicable. The torque values can only be achieved if nut (or tapped hole) has a proof load greater than or …
NOTE 1: References to ‘business’ in this International Standard should be interpreted broadly to mean those activities that are core to the purposes for the organization’s existence. NOTE 2: ISO/IEC 17799 provides implementation guidance that can be used when designing controls.
DIN EN ISO 898-1 – 2013-05 This standard specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel with an ISO metric screw thread in accordance with ISO 68-1 with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3 when tested at an ambient temperature range of 10 °C to